Drop Tester

Hein’s high-class Drop Testis used to test the breakages of small items and components. The item to be tested is attached to the suction pads of the machine and dropped from the selected speed of 3, 5-6, 25 m/s or height of 600-2000 mm. The dropping tray guides the item down towards the base at a right angle. With the Drop Tester, you can also attach a high-frequency video camera to the equipment in order to verify what actually happens when the tested item hits the base of the machine.

The Drop Tester is conformed to the European Machine Directive 89/392 and its amendments 91/368, 93/44 and 93/68. Durability test of packaging materials, product in extreme transportation conditions.

Conforms:

IEC 60068-2-31
IEC 60601-1
MIL-STD-810G, Method 516.5.

 

Tumble Tester

Class of its own Hein’s Tumble Tester is used to test the breakage of various small items and components. The item to betested is placed in the Tumble Tester. The desired number of falls is selected and the machine is set in motion. After this, the machine will drop the item onto the base of the machine at random positions (free fall).

The rotation speed of the machine is selected in order to get the item to fall to the middle of the base. The machine can be modified according to the customer’s wishes.

The Tumble Tester is conformable to the European Machine Directive 89/392 and its amendments 91/368, 93/44 and 93/68.

Conforms:
IEC 680068-2-31 (Incorporated IEC 60068-2-32 and BS EN 60068-2-32)
IEC 60950-1.

 

Abrasion Tumbler Tester

Hein’s Abrasion Tumbler is used to test electronic devices’ durability against small particles such as dust, textile dust or sand. The items to be tested are placed inside three lockers of Abrasion Tumbler’s drum. Inside of the drum is covered with denim and small denim strips are used as the standard abrasion material within the lockers too. Depending on user’s needs, other material can be used as well.

All three lockers are separated from each other by a dust-proof wall. Both front and back of the drum are made of transparent polycarbonate. The rotation speed of the drum is possible to set 10-30 rpm. Testing period can be set with a programmable counter.